Velkommen til Nordic Sound Design

IN50 SIGNATURE

The IN50 Signature integrated amp-preamp is manufactured with the greatest care: we choose the best possible components to achieve the highest level of sound performance. This rigorous search for perfection goes through the design of proprietary ATOLL circuits in order to preserve the integrity of the most subtle musical signals.

IN80 SIGNATURE

The IN80 Signature integrated amp-preamp is manufactured with the greatest care: we choose the best possible components to achieve the highest level of sound performance. This rigorous search for perfection goes through the design of proprietary ATOLL circuits in order to preserve the integrity of the most subtle musical signals.

IN100 SIGNATURE

The IN100 Signature integrated amp-preamp is manufactured with the greatest care: we choose the best possible components to achieve the highest level of sound performance. This rigorous search for perfection goes through the design of proprietary ATOLL circuits in order to preserve the integrity of the most subtle musical signals.

IN200 SIGNATURE

The IN200 Signature integrated amp-preamp is manufactured with the greatest care: we choose the best possible components to achieve the highest level of sound performance. This rigorous search for perfection goes through the design of proprietary ATOLL circuits in order to preserve the integrity of the most subtle musical signals.

IN300

The IN300 integrated amp-preamp is manufactured with the greatest care: we choose the best possible components to achieve the highest level of sound performance. This rigorous search for perfection goes through the design of proprietary ATOLL circuits in order to preserve the integrity of the most subtle musical signals.

IN400SE

The IN400se integrated amp-preamp was conceived for optimal musical reproduction and visual perfection. From a mechanical point of view, the chassis is made of 2 mm steel and the front panel of 10 mm aluminium. Its lateral fins are designed to optimally dissipate heat from within the case and absorb mechanical vibrations. 

PR200 SIGNATURE

The PR200 Signature belongs to the range of preamplifiers and power amplifiers offered by ATOLL. This preamplifier represents the modularity and the power that ATOLL wants to put forward: a wide range of combinations and a considerable source of improvements. 

PR300 SIGNATURE

The PR300 Signature belongs to the range of preamplifiers and power amplifiers offered by ATOLL. This preamplifier represents the modularity and the power that we want to put forward: a wide range of combinations and a considerable source of improvements. Its double pair of Pre-out allows to easily combine a power amplifier and a subwoofer.

PR400 SIGNATURE

The PR400 Signature operates in dual mono with one low-noise transformer per channel. The potentiometers and selection relays are also separate for the two channels. The link capacitors (top-of-the-range MKP) are shielded in independent formwork to avoid any parasitic noise. The volume is managed by two motorized, independent, and perfectly synchronized ALPS potentiometers. We use a proprietary servo system, based on a real-time measurement not intrusive to the audio.

MA100

The MA100 mini power amplifier is suitable for most HIFI or audio-video applications. Very scalable, it can be used alone or in bi-amplification. It can be associated with an integrated amplifier or an ATOLL preamplifier. It is bridgeable in a monoblock via an internal switch. It is fitted as standard with a 12 V Trigger input (direct ignition in conjunction with a preamp).

AM100 SIGNATURE

The AM100 Signature block is suitable for most HIFI or audio-video applications. Coupled with a PR200 Signature, listening is transparent and detailed, and the different shots are rigorously respected. Very scalable, it can be used alone or in bi-amplification. The amplifier is bridgeable in a monoblock via an internal switch. It is equipped as standard with a 12 V trigger input (direct ignition in conjunction with a preamp).

AM200 SIGNATURE

The AM200 Signature block is suitable for most HIFI or audio-video applications. Very scalable, it can be used alone or in bi-amplification. It can be associated with an integrated amplifier or an ATOLL preamplifier. It is bridgeable in a monoblock via an internal switch. It is equipped as standard with a 12 V trigger input (direct ignition in conjunction with a preamp).

AM300

The power amplifier AM300 block is suitable for most HIFI or audio-video applications. Very scalable, it can be used alone or in bi-amplification. It can be paired with an ATOLL-integrated amplifier or preamplifier. It is bridgeable in a monoblock via an internal switch. It is equipped as standard with a 12 V Trigger input (direct ignition in conjunction with a preamp).

AM400 SIGNATURE

During the development of the power amplifier AM400 Signature, the attention to detail led us to take into account all the parameters, to compare and listen to each component. The power stages have 8 MOS-FET transistors per channel which provide considerable energy, perfectly controlled thanks to carefully designed audio stages. The connecting cables between the motherboard and the loudspeaker outputs are made of pure copper, deoxygenated, silver plated with Teflon insulation. One of the best French manufacturers of audio cables makes these cables on demand. Similarly, filter capacitors, with low series resistance, are made to specifications by a leading specialist. 

MD100

The latest addition to the Mini line, the MD100 player is the ideal complement to the elements of our “Mini-system” for playing your CDs.

CD50 SIGNATURE

The Signature Series CD players have benefited from many innovations, whether in terms of power supplies or audio and conversion stages. In addition, all of these devices can now accommodate a 24 bits/192 kHz DAC board relying on the player’s internal converter. The USB input is asynchronous.

CD80 SIGNATURE

The Signature Series CD players have benefited from many innovations, whether in terms of power supplies or audio and conversion stages. In addition, all of these devices can now accommodate a 24 bits/192 kHz DAC board relying on the player’s internal converter. The USB input is asynchronous.

CD100 SIGNATURE

The Signature Series CD players have benefited from many innovations, whether in terms of power supplies or audio and conversion stages. In addition, all of these devices can now accommodate a 24 bits/192 kHz DAC board relying on the player’s internal converter. The USB input is asynchronous.

CD200 SIGNATURE

The Signature Series CD players have benefited from many innovations, whether in terms of power supplies or audio and conversion stages. In addition, all of these devices can now accommodate a 24 bits/192 kHz DAC board relying on the player’s internal converter. The USB input is asynchronous.

DR100 SIGNATURE

The Signature Series CD players have benefited from many innovations, whether in terms of power supplies or audio and conversion stages. In addition, all of these devices can now accommodate a 24 bits/192 kHz DAC board relying on the player’s internal converter. The USB input is asynchronous.

DR200 SIGNATURE

The Signature Series CD players have benefited from many innovations, whether in terms of power supplies or audio and conversion stages. In addition, all of these devices can now accommodate a 24 bits/192 kHz DAC board relying on the player’s internal converter. The USB input is asynchronous.

CD400SE – DR400SE

The CD400se and the DR400se models have their chassis made of massif aluminium sides that ensure perfect mechanical inertia. In addition, the original shape has been studied to absorb better all vibrations. The top loading drive specifically developed for the 400 line consists of mechanical elements in steel and aluminium treated against vibrations, decoupled from the frame of the device by four metal spacers. This greatly enhances the accuracy of the laser and the error correction circuits. This construction greatly improves the musical timbres and treble reproduction.

DAC100 SIGNATURE

The DAC100 Signature converter has been implemented to offer you the best of your favourite music. Many believe that the secret to a good converter lies in choosing a “high-end” converter chip. If this is important, we know that the essence of the musicality also resides in the line signal processing stages, the power supplies (transformers, filtering, regulation), the digital signal processing before conversion, the quality of the key components: clocks, transistors, capacitors, etc…

DAC200 SIGNATURE

The DAC200 Signature converter has been implemented to give you the best of your favourite music. Many believe that the secret to a good converter lies in choosing a “high-end” converter chip. If this is important, we know that the essence of the musicality also resides in the line signal processing stages, the power supplies (transformers, filtering, regulation), the digital signal processing before conversion, the quality of the key components: clocks, transistors, capacitors, etc.

DAC300

The DAC300 converter has been implemented to offer you the best of your favourite music. The combination of the SABER ES9038PRO converter, renowned for its musicality, and the feedback-free audio stages designed specifically by our design office, make this device the flagship of the converter range. The secret: the analogue signal processing stages, the power supplies (transformers, filtering, regulation), the digital signal processing before conversion, and the quality of the key components: clocks, transistors, capacitors, etc.

MS120

Whether it is listening to high-definition streaming music, locally from your network, from a USB key, a hard drive, Bluetooth®, or your favourite internet radio stations, our mini network player MS120 is totally adapted to the current needs related to the reading of dematerialized music files. It embeds a high-performance converter and can be used as a pure source or as a preamplifier.

ST200 SIGNATURE

Whether it’s listening to high-definition streaming music, locally from your network, from a USB key, a hard drive, via Bluetooth®, or via your favorite internet radios, our ST200 Signature network player is totally adapted to the current needs related to the reading of dematerialized music files. It embeds a high-performance converter and can be used as a pure source or as a preamplifier.

ST300 SIGNATURE

Whether it’s listening to music in high definition streaming, locally from your network, from a USB key, a hard drive, via Bluetooth®, or via your favorite internet radios, our ST300 Signature network player is totally adapted to the current needs related to the reading of dematerialized music files. It embeds a high-performance converter and can be used as a pure source or as a preamplifier.

DaaD2 mk. 2

DaaD3 mk.2

DaaD4 mk.2

Eco DaaD mk.2

POLIFEMO variabele resonator

Volcano variabele resonator

Halifax

HALIFAX, together with VOLCANO, is the newest addition to the family of variable resonators developed and manufactured exclusively by Acustica Applicata. It is a device specifically designed to improve the timbre and dimensionality of virtually any music reproduction system in any listening room.

BAT VK-80

Rør forforsterker

BAT VK-90

Rør forforsterker

BAT REX 3

Rør forforsterker

BAT VK-56

Effekt rørforsterker med 6C33C rør

BAT VK-56SE

Effekt rørforsterker med 6C33C rør

BAT VK-90 p

Effekt rørforsterker med 6C33C rør

BAT REX 3

Effekt rørforsterker med 6C33C rør

BAT REX 500 Power Amplifier

BAT VK-255 SE

Mosfet effekt forsterker

BAT VK-80i

integrert forsterker basert på 6C33 rør.

BAT VK-3500

Integrert forsterker på 150 W.

BAT VK-P 80 RIAA

BAT VK-P 90 Phonostage

BAT REX 3 DAC

Rør DAC med 6 stk. 6C19 rør

Cammino Standard S 1.0 S

RCA signalkabel

Cammino Premium S 2.0 S

RCA signalkabel

Cammino Reference 2.1 Ref.

RCA signalkabel

Cammino B 1.0 S

XLR kabel

Gran Gioia MK 2

The Bass Phase Plug, the new horn throat construction, the further simplification, the new micrometrical regulation of the horn shift.

Gran Gioia 2x10"

Working on a new horn concept to have a smaller full horn loudspeaker, it developed to become a proficient loudspeaker in a certain kind of coaxial configuration: the two woofers working in the same horn mutate to one only loudspeaker. Therefore it is a Coax a 'la Blumenhofer' with a compression driver horn in the middle.

Corona 2x220

The next step for the Corona Series is to implement in it our 20cm woofer, the one from the Tempesta 20 and widen the bass horn in the front. This version is also available with the Beryllium Mid-High Range horn, as option.

Corona 4x180

Our target was to be able to deliver the Blumenhofer sound in an elegant outfit. Keeping speed, horn and power. Transmitting the goosebumps and the intention of the musician.

Genuin FS 1 MK 3

When our 16" woofer reached maturity, we finally decided to upgrade the Genuin FS 1 to MK 3 level. The look and structure are essentially the same. The changes are in the inside. The new air dried paper membrane is moved by a really powerful Alnico magnet. This brings the mid-bass of our Genuin FS 1 MK 3 to a complete new level of quality. More bass, more deepness, more richness in the midrange.

Genuin FS 2 MK 2

The new 12" woofer of the Genuin FS 2 MK 2 has the same technologies like the 16" woofer of the Genuin FS 1 MK 3. A powerful AlNiCo magnet moves a very good sounding paper membrane. The result is an improved Genuin FS 2 that then deserves the MK 2 tag. Structurally the loudspeaker is the same has the same dimensions and the same look. The sound has become more rich, the result and the improvements are in the same fields like the improvements on the Genuin FS 1 MK 3: more bass, more deepness and improved richness in the midrange.

Genuin FS 3 MK 2

After 10 years our Genuin FS 3 needed overhauling: it was missing the new technologies. We wanted to introduce the harmonic constructions, and… our new driver.

Genuin Bookshelf

Essentially a Genuin FS 3 MK 2 in a short cabinet. The Genuin Bookshelf is available with an 8" or a 10" woofer. It is charming the way it delivers You any kind of music. A real compact allrounder.

Tempesta 20

The top expression of our Tempesta series.

Tempesta 17

The Tempesta 17 is our complete proficiency entry level: it is able to convince both for music reproduction and cinema experience.

Tempesta Bookshelf

In compact form, ideal to be closed in a bookshelf and disappear from view, but ideal for transferring the understatement of its power. It does not fear the comparison with other competitors, both for music and cinema

Fun 17

Together with the Fun 13 and the Fun 10, the Fun 17 bears a Quarter-Wave-Length horn for the bass and a silk dome tweeter. The simplified structure and the compact form give a sustainable answer in sound and musicality. Maintained is the natural impression and the founded substance, that characterize a Blumenhofer loudspeaker.

Fun 13 mk.2

The Fun 13 MK 2 is an improvement on its predecessor, the Fun 13.

Tempesta Bookshelf

In compact form, ideal to be closed in a bookshelf and disappear from view, but ideal for transferring the understatement of its power. It does not fear the comparison with other competitors, both for music and cinema

Mini

After some years of waiting we decided to reintroduce the Mini in our product portfolio.

Classic 1743

Classic 1733

Classic 1722

Wiki

Which is the horizon of a 2-Ways Loudspeaker?

Concert X

In 2014 we wanted to start some development to be able to produce even bigger loudspeakers. With this loudspeaker we wanted to understand how two 16" woofers can be combined in the same horn. The development led us to move the first steps in terms of Bass-face-plug to increase the compression factor before the horn.

DV-3

Still 2 ways loudspeaker, but have a look at the dimensions…

40ies Anniversary

Working out for possible configuration: we want more efficiency. How do we get it?

Oval One Interconnects

Our Oval One Interconnects were developed for audiophiles who don’t need XLR connections but want superb-value. They use a braided signal conductor in our proprietary hollow oval design along with a braided outer shield mated to true 75 ohm RCA connectors with a low-loss dielectric.

Crystal Apex Interconnects

Our NEW Crystal Apex Interconnects are built much like our highly acclaimed Silver Apex Interconnects. They offer a double shielded design constructed of Pure Crystal Copper woven into our proprietary hollow oval geometry. These interconnects maintain the high frequency components of your source.

Silver Apex Interconnects

Our Silver Apex Interconnects are our top silver cable. It offers a double shielded design with a noise floor so low you can hear your amp breath. Constructed of pure silver over a stabilizing strand of oxygen-free copper, woven into our proprietary hollow oval geometry, these interconnects maintain the high frequency components of your source.

Solo Crystal Oval Interconnects

Our Solo Crystal Oval Interconnects utilize Continuous Cast Copper (solo crystal copper) braids with our patented hollow oval design put nothing in the way of the musical signal. Using conventional round cable is like pouring fine wine through a lead pipe. What comes out is definitely not what went in.

Copper Oval-In Micro Interconnects

Our Copper Oval-In Micro Interconnects pack a lot in a small cross-sectional area. Three 18 gauge conductors and FEP dielectric in a micro design give great performance in a compact design. These interconnects were designed using our patented hollow oval geometry to control current density in a form suitable for braiding from pure oxygen free copper. The signal lines are then wrapped with a shield to provide protection from EMI/RFI. The result is a super quiet, extremely neutral cable, priced well within any budget.

Chocolate Oval-In Interconnects

Our Chocolate Oval-In Interconnects are made from our premium in-wall (UL and CSA FT4) rated interconnect cable. It can be fitted with our new non-locking RCA connector or XLR connector. This is our first in-wall rated cable in a balanced design. Since it is a balanced design, it will have better common-mode noise rejection for an ultra low noise floor.

Black Oval 12 Speaker Cable

The Black Oval 12 Speaker Cable is our best value for a high-end speaker cable. It uses the same patented hollow oval design as the Oval 9, but in a slightly smaller 12 gauge oxygen free copper.

Clear Oval Speaker Cable

Our Clear Oval Speaker Cable is such a transparent cable, we’ve even made the outer jacket of clear PVC. Designed just like our highly-acclaimed Oval 12, but using 14 AWG wire instead of 12 AWG, Clear Oval offers much of the same performance but at a lower price.

Crystal Apex Speaker Cable

Our Crystal Apex Speaker Cable is built much like our highly acclaimed Silver Apex Speaker Cable. This 12-gauge cable is made with Pure Crystal Copper utilizing our patented Hollow Oval design in its construction. This is our first audio cable to use grip textured shrink wrap giving it a sleek, one of a kind look. They are available with either T1 Spades or BFA Banana connectors.

Silver Apex Speaker Cable

Our Silver Apex Speaker Cable has three 9 AWG conductors. It is our most advanced design with a hollow oval inside a hollow oval conductor inside a hollow oval conductor. Most speaker cables have no shielding. The Silver APEX speaker cable has an amazing double shield for the lowest noise floor and best performance. It is an extremely fast and detailed cable. You can hear your amp breath and will hear things you have never heard on your recording before.

Solo Crystal Oval 8 Speaker Cable

Our Solo Crystal Oval 8 Speaker Cable consists of four 11 gauge continuous cast copper (solo crystal copper) conductors used in our proprietary braided hollow oval geometry. It is available as internal bi-wire or shotgun (two wires per connector) configuration. When the two wires are combined in the shotgun mode, it is equivalent to an 8 gauge conductor. This is a perfect match with our new Solo Crystal Oval Interconnects.

Big Silver Oval Speaker Cable

The Big Silver Oval Speaker Cable, our premier silver cable, has been improved by going from a 12 gauge to a 9 gauge cable and even a more elongated oval geometry for better performance. This cable is very fast and detailed but without the harshness often associated with silver cables. It now has the punch in the low end with the incredible mid and highs that people have come to love in the Silver Oval.

Silver Oval Two Speaker Cable

Our Silver Oval Two Speaker Cable is meticulously constructed using our hollow oval design. This cable is made by layering pure silver over a stabilizer strand of high-purity OFC copper, which is then woven into a 12-gauge hollow oval conductor and then surrounded by another 12-gauge hollow oval conductor. The cable is especially open and detailed, but without the harshness often associated with silver cable. The Silver Oval 2 cable is then combined with a computer matched dielectric and is shielded against MVI and other interference for ultra-quiet, noise-free performance. Instruments emerge out a silent background. Depth and detail are exquisite.

Black Mesh Oval 9 Speaker Cable

Our Black Mesh Oval 9 Speaker Cable is a massive 9 gauge speaker cable capable of handling deep bass notes played at high volume.

Chocolate 12/2 Speaker Cable

Our Chocolate 12/2 Speaker Cable is our best in-wall rated cable. Two 12 AWG conductors use our proprietary braided hollow oval geometry that keeps every conductor wire statistically as close to the return current as every other wire. The evenly distributed current density gives you a big performance upgrade from solid-conductor cable designs. We pay as much attention to materials as we do to design, relying on special oxygen-free copper for smooth, effortless audio. A carefully mated low-loss dielectric helps keep noise levels low. The result is an affordable in-wall cable that sounds every bit as good as many pricier ‘short-run’ cables on the market. The cable has both a UL rating and CSA FT4

Digital Crystal Cable

Our Digital Crystal Cable is our best digital cable. It’s made with Continuous Cast Copper (solo crystal copper) braids with our patented hollow oval design to bring out the best in your equipment.

Black Digital Cable

Our Black Digital Cable uses a braided oval signal conductor alone with a braided outer shield mated to either a true 75 Ohm solder-less RCA connector or BNC connector. It uses a low loss dielectric with 100% shield coverage to create a great cable at a great price.

Pure Silver USB Cable

Our Pure Silver USB Cable is double shielded cable with a large signal wire of 28 AWG and power of 24 AWG to avoid voltage drop. The conductors are 99.99% pure silver and also twisted to reduce Electromagnetic interference. The connector pin is gold plated.

Power Oval 2 MK II Power Cable

The new Power Oval 2 MKII Power Cable has a new braid design on the shield and the size has increased to 10 gauge. According to literature, transient noise voltages in power distribution systems are produced by sudden changes in current demand. A low impedance transmission line design, such as that used by Analysis Plus Power Oval cables, is recommended to minimize this noise. The current carrying conductors are then surrounded with a shield to prevent pick-up of high frequency noise.

Ultimate Power Oval Power Cable

Our Ultimate Power Oval Power Cable has a balanced design for lower common mode noise. A unique feature with our patented hollow oval design is the ground lead surrounds the hot and cold leads to keep the signal pristine. Other power cord designs are like a leaky sewer where electromagnetic noise seeps in and oozes out. With its low inductance design and extra shield it has a very low noise floor for a better Signal to Noise Ratio (SNR) to help bring out subtle nuances in the music.

Power Oval 10 Power Cable

Our Power Oval 10 Power Cable is a 10AWG 600 Volts CL2 UL approved cable. Although Oval 10 is the best choice for high current applications, it performs equally well with low current analog and digital equipment too. WattGate 320 IEC and WattGate 5266 connectors are used with this power cable.

Low Mass Oval Phono Cable

Our Low Mass Oval Phono Cable is a low mass and low cross-sectional area cable. It is constructed of pure silver over a stabilizing strand of oxygen-free copper, woven into our proprietary hollow oval geometry in an oval-coaxial configuration. It is hard to believe that a cable with this low of cross-sectional area is made of two 18 gauge conductors that are surrounded by low loss FEP. A great value in performance and price. Available with RCA connectors both ends or a DIN at one end.

Solo Crystal Oval Phono Cable

Our Solo Crystal Oval Phono Cable is made with our solo crystal copper and our patented oval design, this cable is available with RCA to RCA connectors and ground wire for a high-end musical performance.

Silver Apex Phono Cable

Our Silver Apex Phono Cable has our most advanced geometry with a hollow oval cable inside a hollow oval cable inside a hollow oval cable for a double shielded design for a noise floor so low you can hear your amp breathe. Constructed of pure silver over a stabilizing strand of oxygen-free copper, woven into our patented hollow oval geometry. Hear the music you have been missing. Available with a straight DIN to RCA, 90 degree DIN to two RCA, RCA to RCA connectors, straight DIN to XLR, 90 degree DIN to two XLR, XLR to XLR connectors. All phono cables include a ground wire.

LEBEN CS-300F

LEBEN CS-300Xs

LEBEN CS-600 X INTEGRATED AMPLIFIER

Leben CS 600 X er vel markedets mest fleksibele forsterker. Man kan benytte hele ti forskjellige type rør: KT 66, KT 77, KT 88, KT 90, KT 100, 350b, EL 34, 6CA7, 6L6, 5881, og 6n3cE.

LEBEN RS-28CX PREMIUM PREAMPLIFIER

High-end forforsterker med innebygget RIAA og ekstern strømforsyning.

LEBEN CS-1000P STEREO POWER AMPLIFIER

Tube complement: 4 x KT120, 2 x 6922/6DJ8(ECC88), 2 x 6CG7/6FQ7.

LEBEN RS-30EQ RIAA

Legendarisk RIAA med 12AT7 rør. MM eller MC med step up, gir magisk platespiller lyd !

IOTA

The IOTA incorporates the implementation of radical and unorthodox thinking in order to offer the same integrity and musical capability that distinguishes all Neat loudspeakers. It is especially suited to the current crop of all-in-one streaming systems, from which a very high level of sound quality can be attained, but space is usually at a premium.

IOTA – ALPHA

Neat’s loudspeakers have long been renowned for creating big sounds from compact and elegant enclosures. However, the Iota ALPHA succeeds in stretching this concept well beyond the limits of what might be expected.

IOTA – XPLORER

This exciting design uses the same basic configuration as the acclaimed Iota Alpha speaker, in an enlarged form. The top section is sealed off from the lower, and acts as a two-way infinite baffle loudspeaker. It houses Neat’s own P1-R3 170mm bass/midrange drive unit alongside an Air Motion Transformer (AMT) tweeter in a horizontal array, as per the Iota and Iota Alpha models.

EKSTRA – THINKING INSIDE THE BOX

This elegant new design uses the configuration first exploited in the prestige Neat Ultimatum XL6 loudspeaker. The top section is sealed off from the lower, and incorporates two sealed chambers, operating as a two-way infinite baffle loudspeaker. A 50mm ribbon-type tweeter and 134mm bass/midrange unit are both mounted on a specially profiled sub-baffle, attached to the main cabinet via a de-coupling polyethylene membrane.

MINISTRA

The Ministra is a boundary design, intended for discreet close-to-wall placement. The presentation is typically Neat; musically engaging, with a generous soundstage and tremendous agility. Bass is surprisingly well extended, displaying the same levels of control shown with other Neat iso-baric designs.

ORKESTRA

Combining elements from the EKSTRA and the prestige ULTIMATUM XL6 Model, the Orkestra is a 2.5 way design incorporating a 75mm true ribbon tweeter, and three 170mm main drive units.

MAJISTRA

The front baffle, which is coupled to the cabinet via a polyethylene membrane, houses the ribbon tweeter and a 170mm drive unit handling bass and midrange frequencies.

Motive SX1

Although this is the taller of the two floorstanders in the Motive SX range, the SX1 is nevertheless a compact and elegant model. It will blend discreetly into any living room whilst its performance gives little away to larger and more expensive models.

Motive SX2

At only 76cm high, the Motive SX2 is an exceptionally compact floorstander for those who want all the musical performance of a Neat floorstander without taking over the living room.

Motive SE2

At only 76cm high, the Motive SE2 is a beautifully compact floorstander which takes the ingredients of the Motive 2 design several steps further to offer a genuinely stunning performance.

Motive SX3

In common with Neat’s earlier stand mount models, the Motive SX3 once again raises the standard of sound quality expected from a speaker of this size and price. Ideal for use in smaller spaces or as a rear speaker in a multi-channel system, the SX3 has an open and strikingly clear sound with faithful dynamics and a focussed stereo image.

Motive SX-C

This two and half way centre speaker is voice-matched to the rest of the Motive SX range, providing seamless integration in a multi-channel context. The Motive SX-C is a full-range, sealed-box system designed to give flawless performance in as many situations as possible. The fine, articulate voice band and the wide dynamic range preserve all the drama and detail of home cinema recordings.

Ultimatum – XLS

The ULTIMATUM XLS loudspeaker is a standmount design which adheres to all the principles that have marked out the ULTIMATUM project and given it such enduring success. The ultra-rigid birch-plywood enclosure, innovative baffle-decoupling technology, ‘isobaric’ bass loading and use of twin EMIT ribbon-type super-tweeters are employed here to deliver the ULTIMATUM promise of a lifetime of musical enjoyment.

Ultimatum – XL6

The ULTIMATUM XL6 loudspeaker is a floorstanding design which adheres to all the principles that have marked out the ULTIMATUM project and given it such enduring success. The ultra-rigid birch-plywood enclosure, innovative baffle-decoupling technology, ‘isobaric’ bass loading and use of twin EMIT ribbon-type super-tweeters are employed here to deliver the ULTIMATUM promise of a lifetime of musical enjoyment.

Ultimatum – XL10

The ULTIMATUM series of high-performance loudspeakers was conceived by Neat founder, Bob Surgeoner, in 1993 and launched in 1999 with the introduction of the Ultimatum MF9.

PETITE – 30th Anniversary Limited Edition

Officially launched in September 1991, the original Petite quickly became a firm favourite with audio enthusiasts and thus inspired Neat to become a full-time manufacturer of loudspeakers.

PETITE CLASSIC

The runaway success of the 2021 limited edition 30th Anniversary ‘Petite 30’ model has led to the demand for a new, ongoing version of the Petite.

SOTA Comit VI med Rega S 330 tonearm.

SOTA Escape med Rega 220 tonearm

SOTA Moonbeam VI med Rega 220 tonearm.

SOTA Sapphire VI

SOTA Nova VI

Sonitus Decosorber Natur absorbers

Sonitus Big Fusor

Sonitus Decotrap Natur Bassfelle som er virker ned til 50 Hz

Visilio

A modern and trendy design, combined with high performance acoustic absorption material on the back and veneered CPL laminate on MDF at the front. The standard size of 1 Panel is 120x60x4,1cm which includes 25mm Premium grade PET absorption plates. The size of the panel and the thickness of the PET PREMIUM absorption plate can be modifed on order.

Bigfusor II

Easy installation with non aggressive adhesives , or silicone.

SS-6 | Vintage Hi-Fi Speaker Stands

Our historical Flagship. It is of critical importance for the performance of monitor-type loudspeakers to have them positioned at the correct height. Additionally, since this type of speaker is often relatively light in weight compared to floor-standing units, it is essential to maintain high stability and rigidity. And, as with all components, proper decoupling must be considered.